en – Original instructions
e-IXP(A), e-IXPC(A), e-IXPF(A) – Additional Installation, Operation and Maintenance Manual
59
5.
The object of the declaration described above is in conformity with the relevant
Unionharmonization legislation:
•
2014/34/EU Directive of 26 February 2014 and subsequent amendments (equipment
intended for use in potentially explosive atmospheres).
•
2014/30/EU Directive of 26 February 2014 and subsequent amendments
(electromagnetic compatibility)
•
2011/65/EU Directive of 8 June 2011 and subsequent amendments, including the (EU)
2015/863 Directive (restriction of the use of certain hazardous substances in electrical
and electronic equipment).
6.
References to the relevant harmonized standards used or references to the other technical
specifications, in relation to which conformity is declared:
Pump: EN 1127-1:2019, EN 15198: 2007, EN ISO 80079-36:2016, EN ISO 80079-37:2016
•
Motor: refer to electric motor manufacturer’s declaration of conformity included in the
supply
•
Flexible coupling: refer to flexible coupling manufacturer’s declaration of conformity
included in the supply
•
Refer to the declaration of conformity of the electric motor manufacturer included in the
supply
EN IEC 63000:2018.
7.
Notified body:
ATEX Pump: technical documentation (file name IXP ATEX rev. 0 of
18.01.2022) deposited at Intertek Italia S.p.A. (NB 2575)
Receipt number: ITS-I 32053
Motor: refer to electric motor manufacturer’s declaration of
conformity included in the supply
Flexible coupling: refer to flexible coupling manufacturer’s
declaration of conformity included in the supply.
8.
Additional information:
ATEX The following specific conditions of use apply.
– The equipment must be suitably grounded (earthed) prior to
operation.
– It is the user’s responsibility to ensure the equipment does not
run dry. Any control system used to achieve this must comply
with the relevant requirements of EN 80079-37.
– The equipment may only be operated when it is filled with the
liquid to be pumped.
– The liquid to be pumped must have conductivity >1000 pS/m
(CLC/TR 60079–32–1:2018).
– Maximum temperature of the pumped liquid: refer to paragraphs 1.4.2 and 8.2 of this
manual.
RoHS Annex III – Applications exempted from the restrictions: lead as a binding element in
steel, aluminium, copper alloys [6(a), 6(b), 6(c)].
Signed for and on behalf of:
Xylem Service Italia S.r.l
Montecchio Maggiore, 17/02/2022
Marco Ferretti
Chairman of the Board of Directors
rev.00
Lowara is a trademark of Xylem Inc. or one of its subsidiaries.
