4
1.0 INTRODUCTION
© The copyright of this instruction book is the
property of XYLEM. This instruction book is
supplied by XYLEM on the express understanding
that it is to be used solely for the purpose for
which it is supplied. It may not be copied, used
or disclosed to others in whole or part for any
purpose except as authorised in writing by XYLEM.
XYLEM reserves the right to alter, change or
modify this document without prior notification.
In the interest of continued development XYLEM
reserves the right to alter or modify the design, or
assembly process of their products without prior
notification.
The Ballast King is a direct current (DC) electrical
flexible impeller pump. Depending on what
model you have purchased (see section 4, Unpack
and Contents), will determine what installations
and what applications will be feasible for the pump
you have purchased.
2. 0 SYMBOLS AND USING THIS INSTRUCTION
BOOK
Caution, risk of danger. See note
or adjacent symbol.
Caution hot surface
Caution / risk of electric shock.
Recyclable packing material.
Do not dispose of product in normal
domestic waste.
Refer to this instruction book.
3.0 SAFETY INFORMATION
WARNING!
Prior to installation or use, read this installation and
operating instructions. Installation and operation
must comply with local regulations and accepted
codes of good practice.
Only used with specified products. DO NOT USE
WITH LIQUIDS WITH A FLASH POINT BELOW
100°F (38°C) OR USE WHERE FLAMMABLE
VAPORS ARE PRESENT.
This product has been designed for safe operation
when used as detailed in accordance with the
Manufacturer’s instructions.
This manual also contains necessary
information for the correct installation.
This manual was developed for qualified
personnel with suitable training and
technical qualification to operate this type of
equipment.
NOTE: Failure to use this equipment
in accordance with the manufacturer’s
operating instructions may compromise
your basic safety protection afforded by the
equipment and may invalidate the warranty
/ guarantee. The warranty / guarantee
does not cover damaged caused by faulty
installation or misuse of the equipment. If
the recommended safety notices are not
strictly observed, it can lead to serious or fatal
injuries of personnel and/or material damage.
Failure to observe the recommended safety
procedures can lead to material damage.
Only qualified Service personnel should
attempt to repair / service the product.
Do not immerse any part of this machine in
water / fluid.
Do not operate the machine without
appropriate piping attached.
Do not run the machine without suitable
supervision as established for safe working
practices and company procedures.
Not to be used by children and non-
authorized personnel.
Please keep this manual carefully and
available to all operators.
Always follow good working practice when
using this equipment.
Follow legislation applicable to your areas of
operation.
Do not touch the motor surface during or
after operation of the pump as the surface can
become hot.
Only use Original Equipment Manufacturer’s
Parts and Accessories.
The equipment is not spark, flame or
explosion proof and has not been designed
for use in hazardous areas in terms of the
ATEX Directive 94/9/EC.
