Xylem Goulds AquaBoost VS, Инструкция по эксплуатации

Страница: 10 / 36

3 Product Description
3.1 General description
AquaBoost VS pumping package
The AquaBoost Variable Speed pumping package can precisely match the pump
discharge pressure to the system pressure by varying the speed of the pump. This is
accomplished by using the variable-speed controllers such as the AquaBoost II and
Aquavar CPC.
The pressure transducer monitors the system pressure, allowing the controller to start and
regulate the pump speed. AquaBoost VS is available in simplex and duplex
configurations.
WARNING:
This product can expose you to chemicals including Lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more
information go to: www.P65Warnings.ca.gov.
3.1.1 Operational limits
Ambient temperature and humidity
All electrical equipment is susceptible to failure if operated in ambient temperatures
outside of its rating. Do not operate the unit outside these extremes.
Characteristic Specification
Operating temperature range 32°F to 105°F (0°C to 40°C)
Maximum relative humidity 95% non-condensing
3.1.2 Package information
AquaBoost VS simplex
5
3
2 4
1
6
7
RS000004
This variable-speed configuration uses the AquaBoost II controller model 1151AB2 or 2AB2 (for single-phase
power supply: 115V – 0.75 hp; 230V – 1.5 to 2 hp range).
1. Pump: NPE with TEFC motor
2. AquaBoost II controller
3. Transducer assembly
4. Safety switch
5. Temperature relief valve
6. To drain
7. To controller
3 Product Description
8 AquaBoost VS Pumping Packages INSTRUCTION MANUAL