KPM(T) Series Flat Panel Industrial Monitor
Chapter 5 – Keypad Utility Program
43
143448 (
D
)
Table 5-4. Macros Edit Menu
Command Description
Copy duplicates a sequence of scan codes from the macro into memory.
To select the section to copy:
Edit/Copy
1. Place the cursor on the first character to copy. Press
F
1 and select
Copy.
2. Press
ENTER
. Copy should still be highlighted, but the cursor will
appear on the Edit line.
3. Move the cursor to the last character to copy and press
ENTER
.
The copied item does not appear on the screen until you select Paste.
Edit/Paste Paste inserts a sequence of scan codes (which were saved in memory
using Copy) into the macro. To paste a sequence of scan codes that were
previously copied, position the cursor where you want the text to appear
and then press
F
1. Select Paste and then press
ENTER
.
Codes displays a table of keys and their scan codes in Hex. See the
Codes section in this chapter for a complete code listing.
Hex/Decimal toggles between displaying the scan codes in Hex and
Decimal formats.
I/O allows the user to insert text or type over text in the code(s). Use the
Insert key on your full-stroke external keyboard to toggle between insert
and overtype mode.
Note
The 5012KPMT and 5015KPMT do not support the programming of special
functions such as caps lock, Number lock, or scroll lock.
-
)+
!
Use the Upload Menu to access the keypad version. As illustrated in Table 5-5, the
choices in this menu are Keypad Version and Exit.
Table 5-5. Upload Menu
Command
Description
Keypad
Version
Commands the keyboard controller to send its firmware revision
number.
Exit
Returns to the Main Menu.
$
)+
!
Note
Download contains no options. If you select Download, any macro set
previously programmed is overwritten.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
