KPM(T) Series Flat Panel Industrial Monitor
Chapter 2 – Installation
10
143448 (
D
)
5. Turn on power to the KPM(T) monitor, and then to the host computer. The
system will boot up the installed operating system.
6. Install the application software via a floppy drive, CD-ROM, or the network.
Additional aspects to take into account when mounting your KPM(T) monitor:
••••
Consider locations of accessories such as AC power outlets and lighting
(interior lighting and windows) for installation and maintenance convenience
••••
Prevent condensation by installing a thermostat-controlled heater or air
conditioner
••••
To allow for maximum cooling, avoid obstructing the airflow
••••
Place any fans or blowers close to the heat generating devices. If using a fan,
make sure that outside air is not brought into the enclosure unless a fabric or
other reliable filter is used. This filtration prevents conductive particles and
other harmful contaminants from entering the enclosure.
••••
Do not select a location near equipment that generates excessive
electromagnetic interference (EMI) or radio frequency interface (RFI).
Examples of these types of equipment are: high power welding machines;
induction heating equipment; and large motor starters.
••••
Place incoming power line devices (such as isolation or constant voltage
transformers, local power disconnects, and surge suppressers) away from the
system. The proper location of incoming line devices keeps power wire runs
as short as possible and minimizes electrical noise transmitted to the unit.
••••
Make sure the location does not exceed the unit’s shock, vibration, and
temperature specifications
••••
Install the unit in the rack or panel in such a way as to ensure that it does not
cause a hazard from uneven mechanical loading
••••
Incorporate a readily-accessible disconnect device in the fixed wiring on
permanently connected equipment
••••
Avoid circuit overloading of the supply circuit
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
