X-45C1-01-30 Rev 1
3
I. FCC Menu
The FCC Menu contains all of the controls required for Part 15 and Part 90 FCC
testing. This screen is only accessible in special in-house firmware builds and is not
available to the end user. The FCC Menu is shown below.
Figure 9. FCC Menu
Five Modes are available here: Receive, CW, Continuous Data, Radio Off, and Normal
Operation. Additionally, the operator may set the frequency of the radio to one of
three points: The lower and upper band limits of the radio, and the center of the
band.
A mode may be activated by highlighting it using the
Down/Up
soft-keys, then
pressing the
Enter
soft key. The mode may be deactivated by pressing the
Enter
soft
key again.
NOTE:
A status line near the bottom of the display will show the current mode of
operation.
1) Radio Receive
Activating this function will place the Transceiver in Receive mode at the
currently selected frequency.
