Technical Specifications
Section
Technical Specifications
Connections
MONO INPUT CHANNEL
Mic Input
sensitivity -10 a -50 dB
XLR-F, balanced
impedance 2 Kohm
Line Input
sensi20 a -20 dB
TRS Jack, Bal/Unbalanced
impedance 10 Kohm
EQ
HI ±15 dB @ 12KHz shelving
MID ±15 dB @ 2.5KHz peaking
LOW ±15 dB @ 80Hz shelving
STEREO INPUT CHANNEL
Mic Input
sensitivity da 0 a -50dB
XLR-F, balanced
impedance 2 Kohm
Line Input
sensitivity da +20 a -30dB
TRS Jack, Bal/Unbalanced
impedance 10 Kohm
EQ
HI ±15 dB @ 12KHz shelving
MID ±15 dB @ 2.5KHz peaking
LOW ±15 dB @ 80Hz shelving
MASTER SECTION
MASTER
Nominal output level +4 dBu
TRS Jack, Bal/Unbalanced
C. ROOM output
Nominal output level +4 dBu
TS Jack, Unbalanced
AUX 1 OUT
Nominal output level +4 dBu
TS Jack, Unbalanced
2-TRK OUT
Nominal output level 0 dBu
Rca Unbalanced
2 TRK IN
Nominal input level. -10 dBv
Rca Unbalanced
PHONES
Minimum load impedance 32 ohm
Jack Stereo
Maximum output level (2x) 193 Mw
DIGITAL EFFECT PROCESSOR
Preset
HALL, ROOM, VOCAL e PLATE reverbs
STEREO
DELAY
REV + DELAY
REV
+CHORUS
GENERAL SPECIFICATIONS
Maximum Output Level – All O22 dBu
Crosstalk @1 KHz > 82 dBu
Signal/Noise ratio - unweighted < -93 dBu
THD + noise at +4dB, 1kHz < 0,008 %
Weight - net 1.4 Kg
Dimensions (LxAxP) 22.5 x 26.5 x 8.0 cm
POWER SUPPLY
AC SUPPLY
18 V AC 300mA. NOTE: USE ONLY THE INCLUDED AC/AC ADAPTER
Mains Supply
Europe 230 V AC (±10 %) 50 / 60 Hz
Consumption 46
VA
Carisch S.p.A. reserves the right to modify products aspect and specifications at any time, without notice.
Please refer www.xxlinside.com for any further detail
Please refer to your XXL Dealer for your country rules about servicing.
©XXL 2013
– All rights reserved. Any not-approved copy and use, even partial, of this instruction manual and its texts, it’s
forbidden.
