XC960T
HD
960H
6
www.xvision.com
1. Product Overview
3.
How to Operate the Camera
To operate the camera, firstly you will need to connect the BNC and terminal screws to the BNC and DC
sockets of a power supply and DVR or Monitor.
To provide power to the camera, you will need to use DC Cable. The positive will go into the ‘+” sign and
negative into the ‘-’ sign. To do this, push the orange clip down, place the cable into the hole and release
the orange clip again. Give the cable a small pull, and you should feel the cable tighten and secure. If not
please repeat this process until cables are secure. Please note that this camera requires DC 12V.
BNC Socket for
video
Terminal screw
for power
1. Product Overview
4.
Camera Menu
To access the camera menu, firstly unscrew the panel at the bottom of the camera using the allen key
(Above, left). This will expose the buttons that are used to control the camera menu. Turn the camera on
and then press the set button. When the menu has appeared, you will be presented with the following
options:
• Lens
• Exposure
• White Balance
• Backlight
• D/N (Day/Night)
• DPC
• Special
Up
Left
Down
Right
Menu/
confirm
