XC960T
HD
960H
5
www.xvision.com
1. Product Overview
2. Installation
The XC960T camera can be wall or ceiling mounted. To install the camera, you will need purchase an
optional bracket or if installing the camera externally, a weatherproof housing. Contact the distributor for
details on more accessories. The instructions below refer to the Xvision XV400B bracket.
1. To install the camera, firstly you will need to
remove the bracket into 3 pieces.
3. Use the base of the bracket as a stencil and
draw circles on the wall where you want to
drill the holes.
5. Once the plugs are in, place the bracket
over the wall plugs and screw the base in
place. Then screw the extension bar of the
bracket back onto the base.
7. Once the camera has been installed,
connect the lens (sold separately). An auto
iris will require you to plug into the auto
iris connector.
2. Screw the top of the bracket in either the
top or bottom of the camera.
4. Take the wall plugs from the accessory
pack and get the correct size drill bit.
Depending on the wall or ceiling, please
make sure to choose the appropriate drill bit.
6. Secure the bracket head and camera in
the bar and use the screw to secure, twisting
clockwise.
