XC960S30IRN
HD
960H
16
www.xvision.com
5.8 Title Set
Option: Area No. / Title X / Title Y / Title
This option allows you to set the title of the camera and position the camera title on screen.
Area No.: Set the area number (1-4)
X coordinates: X position of the title on the screen (0-29)
Y coordinates: Y position of the title on the screen (0-14)
Title: Set the camera title. To do this, use the joystick on the
speed dome controller or arrow keys on your DVR to navigate.
To exit, either press the ‘up’ key or move the joystick up.
Mode: Input method mode, (Capitals, lower case letter,
charachers, symbols or numbers)
Soft Key: Use this to input characters.
Delete: Delete characters in the title
Exit: End and return to the previous menu.
Save: Save the settings and exit the submenu
AREA NO:
1
TITLE X:
00
TITLE Y:
00
TITLE:
CAMERA 1
MODE: A, B......Z
DELETE
EXIT
SAVE
5.9 Alarm Linkage - Not supported (we recommend usgin our XSDA-2 for alarm in and out functions)
Option: Alarm Input / Input Type / Arming Time /
Preset Scan / Pattern Scan / Zone Scan / Alarm Output
The alarm linkage option allows you to set an adjust the alarms on the scannning modes.
Alarm Input: Set up to 2 alarm input numbers
Input Type: NO/NC
Arming Time: Set the arming time (Hours:Minutes)
Preset Scanning: Set alarm linkages on the preset location scans.
(0-4). To do this, select ‘1’ to set an alarm for preset scan 1.
For no alarm, select ‘0’.
Pattern Scanning: Set alarm linkages on the pattern location
scans (0-4). To do this, select ‘1’ to set an alarm for pattern
scan 1. For no alarm, select ‘0’.
Zone Scanning: Set alarm linkages on the zone location scans
(0-4). To do this, select ‘1’ to set an alarm for zone scan 1. For no alarm, select ‘0’.
Alarm Output: Turn the alarm output on or off.
Exit: End and return to the previous menu.
Save: Save the settings and exit the submenu
ALARM IN:
1
IN TYPE:
NO
ARM STA:
DISARMING
PRESET NO:
00
PST SCAN:
00
PATT SCAN:
00
ZONE SCAN:
00
ALARM OUT:
OFF
EXIT
SAVE
