MAINTENANCE
CLEANING
Caution:
The spray gun must not be cleaned by using
flammable liquids with a flash point of less than 21ºC.
After every use it is essential that you clean the gun
thoroughly. This will prevent any blockages occurring
and provide constant performance when you next come
to use it.
When you have finished using the gun, empty any
remaining liquid out of the paint pot. Rinse the pot with
paint thinners and spray through the gun onto cardboard
or newspaper.
Remove the paint pot and suction tube, nozzle and
valve (the spring and piston will be attached to the
cylinder). Lubricate the cylinder, piston, valve and
suction tube with drops of a low-viscosity oil.
Assemble the parts back on the gun and briefly switch
on (1-2 secs) to disperse the oil around the piston and
cylinder. This practise will help prevent corrosion and
keep parts lubricated for next use.
• If the housing of the gun requires cleaning dip a
cloth in the paint thinners, ensuring the cloth is not
dripping, wipe the exterior of the spray gun.
• Please be aware that certain parts of this spray gun
will wear, eventually requiring replacement and that
these parts are not covered by warranty. These parts
include the atomiser valve, spray nozzles, piston and
spring.
• Prior to storing the spray gun, ensure that it is
completely dry. This will minimise residue build-up for
the next use.
Note:
XU1 will not be responsible for any damage
or injuries caused by the repair of the tool by an
unauthorised person or by mishandling of the tool.
WARRANTY
YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A
CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR
WARRANTY. PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY
QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.
The benefits provided under this warranty are in addition to other rights and remedies which are available to you at
law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to
a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have
suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by
contacting our customer service helpline above.
1 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 12 months from the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: nozzles.
WARNING
The following actions will result in the warranty being void.
• Professional, Industrial or high frequency use.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
XU1
Australia/New Zealand (Head Office)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175
5
WARNING!
Ensure the tool is
disconnected from the power supply before
performing any of the following operations.
