XtremepowerUS 75217, Руководство пользователя

Страница: 2 / 14

1
The Swimming Pool Heat Pump Unit is intended to heat the swimming pool water and regulate the
temperature. Use in any other application will void the warranty.
The inlet & outlet connections cannot support any load from another piping system.
Make certain the air outlet is not directed towards any person, animal, or vegetation.
The unit must always be powered off before opening the access panel. Always turn of circuit supplying power
to the unit prior to removing the access panel or performing any electrical work on the unit.
All electrical connections must be performed by a qualified electrician and according to national and local
electrical codes. We have provided important safety messages in this manual and on your heat pump. Always
read and obey all safety messages.
You will need to set the water temperature you desire.
Always install the machine outdoors, while adhering to the minimal clearances needed for proper operation
and heating. DO NOT place the unit next to shrubs, fences, etc. which can block the air inlet. These locations
deny the unit a continuous source of fresh air which reduces its efficiency and may prevent adequate heat
delivery.
Heat Pumps must be installed in accordance with all applicable National and Local codes. In the absence of
local codes, refer to the latest edition of the Canadian Electrical Code (CEC).
The unit will automatically start up when there is proper flow and available power.
If the unit is stopped for an extended period of time or winterized, it must be drained of all water. You will need
to disconnect the IN and OUT water connections. Then the unit must then be tilted or blown out with air until all
water is out.
Do not insert any objects into the air outlet. Do not attempt to disassemble the fan at any time.
If at any time there is any abnormal noise, odor, smoke, electricity leakage, please switch off power
immediately and contact your local dealer. All repairs must be performed by a qualified technician.
Do not store combustible or flammable material near unit.