XtremeAIR XTA-PR30, Руководство по установке и инструкция пользователя

Страница: 26 / 29

26
Care and Cleaning
Metal Finishes
•
Wash with soap and water, glass cleaner, or mild liquid sprays.
Plastic Finishes
•
When control panel trim and end caps are cool, clean with soap and water, rinse and
dry.
•
Use a glass cleaner and soft cloth.
Oven Racks
•
Clean oven racks with solution of detergent and hot water. To clean heavy
soil, use a scouring pad such as steel wool with plenty of water.
Oven Frame
•
Clean with hot water, soap-filled steel-wool pads or cleaners. Rinse well
with clean water and dry.
Oven Gasket
•
Do not clean the gasket. The fiberglass material of the oven door gasket
cannot withstand abrasion.
•
It is necessary for the gasket to remain intact.
Replacing the Oven Light
•
Turn off the power at the main power supply.
•
Remove the lens cover from the housing by pulling straight out.
•
To prevent electrical shock or personal injury, make sure the oven and light
bulb are cool and power to the oven has been turned off before replacing the
light bulb. Make sure the lens cover is in place when using the oven.
Outer Oven Door
•
Use soap and water to thoroughly clean the top, sides and front of the oven
door. Rinse well. You may also use a glass cleaner to clean the glass on the
outside of the door.
•
Do not use oven cleaners, cleansing powders of harsh abrasives on the outside of the
door.
Inner Oven Door
•
Do not allow excess water to run into any holes or slots in the door. Any soap
left on the liner causes additional stains when the oven is heated.
•
Before you call for service, please review the potential problem / possible
causes and remedies shown in the table below.