www.XtremeAirUsa.com
PAGE
5
NOTE: DO NOT TRY TO REMOVE BLOWER OR ITS HOUSING, YOU WON’T BE ABLE TO PUT IT BACK IN. MOREOVER, THE
WARRANTY WILL BE VOIDED.
STEP 1: PROTECT THE COOK TOP
Put a thick, protective covering over counter top, cook top or range to protect from damage or dirt.
STEP 2: CREATE WORK STATION (OPTIONAL)
9. INSTALLATION
Have 2 pieces of wood about 2” x 4” x 20” on
both sides of stove & a plywood on top of
them to protect cook top or stove from
damage or dirt. This plywood will also
create a comfortable work station for easy to
installing.
STEP 3: PREPARE DUCTWORK & SINGLE OUTLET
Make sure you have a 15amp, 120V, 60Hz, single outlet on the left or right of the duct pipe
(usually is on ¼ of cabinet width).
Make sure duct pipe is ready to hook up to the range hood before beginning installation (8”
diameter duct, and roof or wall cap, depending on where you will be venting your hood).
STEP 5: CREATE ACCESS
Create or cut access opening for electrical wire and hood exhaust under the cabinet
STEP 6: ATTACH THE HOOD
Lift the hood up and have it placed
below the cabinet. Make sure to
center the hood beneath the cabinet and
flush with the front of the cabinet.
TIP (optional)
: since the hood is
heavy, a cabinet or a car jack is highly
recommended.
STEP 4: ATTACH 2-INCH WIDE WOOD FILLER STRIPS
For installing under the cabinet with recessed bottom, attach 2-inch wide wood filler strips
(not provided) to each side.
