Xtreme Power 82104, Инструкция по эксплуатации и правила безопасности

Страница: 3 / 16

Stay alert, watch what you are doing, and use common sense when operating the tool. DO NOT use the
tool while you are tired or under the influence of drugs, alcohol, or medication.
Dress properly. DO NOT wear loose clothing, dangling objects, or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts.
Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety
goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in dusty
work conditions. Also use non-skid safety shoes, hard-hat, gloves, dust collection systems, and hearing
protection when appropriate. This applies to all persons in the work area.
DO NOT overreach.
Keep proper footing and balance at all times.
2
Both of the operator’s hands must be used to operate the chainsaw. NEVER operate the chainsaw
with one hand.
Check for damaged parts before each use. Carefully check that the chainsaw will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
chainsaw with a damaged part.
WARNING: Tip contact may cause the guide bar to move suddenly upward and backwards,
otherwise known as kickback, which can cause serious bodily injury.
WARNING: The engine exhaust from this product contains chemicals known to the State of
California to cause cancer, birth defects or other productive harm.
Store the chainsaw when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
DO NOT operate the chainsaw from a ladder or in a tree.
Make sure the chain will not make contact with any object while starting the engine. Never try to
start the chainsaw when the guide bar is in the cut.
DO NOT operate a chainsaw that is damaged, improperly adjusted or not completely and securely
adjusted. Always replace the bar, the chain, hand guard or chain brake immediately if it becomes
damaged, broken or is otherwise removed.
ALWAYS
wear the proper protective equipment including ANSI Z87.1 compliant eye protection, NIOSH
compliant breathing protection, anti-vibration work gloves, steel toed work boots, and a helmet.
DO NOT put pressure on the saw at the end of the cut. Applying pressure can cause you to lose
control when the cut is completed.
With the engine stopped, hand carry the chainsaw away from your body and the guide bar and chain to
the rear, preferably covered with a scabbard.
IMPORTANT SAFETY INFORMATION