Xtramus NuBAR-1000, Руководство пользователя

Страница: 36 / 52

35
C : NuBAR ID
A read-only value of Current NuBAR ID, which can be tuned by NuBAR ID rotary switch on the panel of the
device.
D : Local Speed: Auto or force test speed and duplex mode that generates from local side. Force mode
includes 10Mbps full duplex only.
E : Remote Speed: Auto or force test speed and duplex mode that generates from remote side. Force mode
includes 10Mbps full duplex only.
F : Length (bytes): The length of test packet, from 64 bytes to 1518 bytes and random
G : Transfer Rate (Mbps) Local to Remote: The transfer rate in Mbps from local to remote side
H : Transfer Rate (Mbps) Remote to Local: The transfer rate in Mbps from remote to local side. When this
value is applied to Lord NuBAR-1000, the Lord NuBAR-1000 negotiates with the Servant NuBAR-1000 to
transfer the test streams back to Lord NuBAR-1000.
I : Payload: Contents in hexadecimal mode carried in Ethernet frame (packet). Default is Random payload
and other type of payload will created in the future.
J : Criteria: Loss Packets: The count of packet loss allowed
K : Layer2: NuBAR-1000 sends layer 2 packets to excute the test.
L : IP: NuBAR-1000 sends IP packets to excute the Ethernet layer 3 test, user should set the Source IP,
Destination IP, Gateway IP and Mask.
Button
M : Load From File: Select a configuration file that is created and saved previously for the test.
N : Save to File: Save current configuration to a file. System shows the directory for user to select the
location to save the file