Xtramus NuBAR-1000, Руководство пользователя

Страница: 23 / 52

22
 Configure the test duration for a single test
Test duration is configured by hexadecimal mode that is described at 3.1.3 Test Time Rotary Switch
For 1 minutes (60 seconds) test
Lord NuBAR-1000 Servant NuBAR-1000
4.2.2 Start the Test Procedure
 Power ON both Lord and Servant NuBAR-1000 from power switch.
Note: To fit the compact size of the NuBAR-1000, the power switch is tiny. To prevent damage of this switch,
please slide the switch carefully or push it via the attached ceramic screwdriver.
 Check the system status before starting test.
In normal condition, Power , Servant is ON and Battery is blinking if charging is processing.
Note : To operate different function mode via Functional Rotary Switch, the role of NuBAR-1000 become
Lord . Then the Servant LED is OFF and Lord mode is activated.
 Connect hardware with network cable
Connect the network cable depending on the different test scenario as described in 4.1 Hardware
Connection
 Connect a pair of NuBAR-1000
Press the Tx Test button to test the network. Speed is ON (ON: 1000Mbps connection; Mild blinking (2Hz):
3
C
Configuration for
Servant NuBAR-1000
is not required
Turn On