4
Ø2.5
99.724
99.746
99.729
99.730
2. ASSEMBLY AND ELECTRICAL CONNECTION
Make a 62 x 36 mm gap in the door panel as shown in the figure, then connect the wire to the lock.
The connections must be made by a qualified technician competent to existing electrical safety standards and to
Rules of Good Engineering.
N.B. All connections must be made with the electrical supply switched off and the batteries disconnected.
... WITH OTHER ELECTRONIC / ELECTRICAL / XNOVA LOCKS
To connect the escutcheon to XNova or other electronic/electrical locks, use an interface card (RELAY MODULE Art. 99724 with
MAIN POWERED - Art. 99746 with MAIN POWERED and BATTERY) to be purchased separately. See the article’s instruction manual.
... WITH XMODE ELECTRONIC LOCKS
I N S T A L L E R
99334GB - FINGERPRINT READER - REV. 02
Internal
escutcheon
Cable 99.699
Cable
99.698
Protect wires
against any
external
tampering
AC/DC Adapter
12Vcc - Art. 99.683
Wired battery pack
(9V) - Art. 99.703/704
For XNOVA
use Dry contact
99.727
(White and purple)
For other
eltctronic locks
use bipolar wire
Cable
99.699
230 VAC
Содержание 99.729
Страница 16: ...www mottura it 99334GB 04 17 a_017329 ...