2
INSTALLER
1 - ESCUTCHEON .................................................................................................................. pag. 3
2 - ASSEMBLY AND ELECTRICAL CONNECTION...
...
WITH XMODE
......................................................................................................................... 4
...
WITH XNOVA OR OTHER ELECTRONIC/ELECTRICAL LOCKS
.............................................................. 4
3 - AUTHENTICATION WITH XMODE ............................................................................................. 5
4 - AUTHENTICATION WITH XNOVA OR OTHER ELECTRONIC/ELECTRICAL LOCKS ....... 6
USER
5 -
MANAGING TAGS WITH XMODE ............................................................................................... 7
6 -
MANAGING TAGS WITH OTHER ELECTRONIC/ELECTRICAL LOCKS /XNOVA
6.1
MEMORIZING MASTER TAGS
........................................................................................................ 7
6.2
MEMORIZING SERVICE TAGS
........................................................................................................ 8
6.3
DISABLING SERVICE TAGS
........................................................................................................ 9
6.4
ENABLING SERVICE TAGS
........................................................................................................ 10
6.5
DELETING SINGLE TAGS
........................................................................................................ 11
6.6
DELETING ALL TAGS
........................................................................................................ 12
7 -
MEMORIZING FINGERPRINTS (
XMODE / ELECTRONIC / ELECTRICAL LOCKS / XNOVA)
............. 13
8 -
DELETING FINGERPRINTS (
XMODE / ELECTRONIC / ELECTRICAL LOCKS / XNOVA
) .................... 14
9 -
USING THE FINGERPRINT (
XMODE / ELECTRONIC / ELECTRICAL LOCKS / XNOVA
) ...................... 15
CONTENTS
NOTICE FOR USING THE FINGERPRINT SCANNER
For optimum use of the fingerprint scanner,
it is strongly advised not to install the product in areas exposed to extre-
me temperatures, high temperature fluctuations, high humidity levels, or exposed to dust of any kind and consi-
stency. Avoid installing the product in places exposed to direct sunlight.
When opening the lock, place your finger the same way it was recorded during memorization. The scanner is programmed
to work with a certain degree of security during the scan, and will always recognize only the same portion of skin scanned
during memorization. Therefore, a different finger swipe will NOT be memorized.
During memorization and scanning, place your finger slowly with moderate pressure. Keep it flat and never curved. Dirt or
grease of any kind on the fingerprints to be recorded will make correct functioning of the scanner very difficult or impossi-
ble. Dry or cold skin, or cuts or abrasions on the finger will compromise good scanning. These factors may negatively affect
use of the fingerprints even if they were correctly memorized.
The memorization and use of fingerprints is subjective and may vary considerably from person to person, especially in
relation to the depth and quality of each person’s fingerprints.
CAUTION : the system is supplied in factory condition, i.e., any MOTTURA TAG can operate the lock and
access programming. The first thing the user must do is delete all of the fingerprints and TAGs to prevent
any unauthorized access. After this is done, the user MUST MEMORIZE the fingerprints and TAGs that will
have access to the opening.
99334GB - FINGERPRINT READER - REV. 02
Содержание 99.729
Страница 16: ...www mottura it 99334GB 04 17 a_017329 ...