Xtool ASD60 Скачать руководство пользователя

Страница: 2 / 90

Please read this user manual carefully before using the ASD60 Smart Diagnostic Kit. When

reading the manual, please pay attention to the words “Note” or “Caution” and read

them carefully for appropriate operation.

RADEMARKS

and ASD60 are the registered trademarks of Shenzhen Xtooltech Intelligent

CO., LTD.

In countries that the trademarks, service marks, domain names, logos, and the name of

the company are not registered, XTOOL claims that it still reserves the ownership of the

unregistered trademarks, service marks, domain names, logos, and the company name.

All other marks for the other products and the company’s name mentioned in the manual

still belong to the original registered company.

You may not use the trademarks, service marks, domain names, logos, and company

name of XTOOL or other companies mentioned without written permission from the

trademark holder.

XTOOL reserves the right to the final interpretation of this manual content.

OPYRIGHT

Without the written consent of Shenzhen Xtooltech Intelligent Co., Ltd., any company or

individual shall not copy or backup this operation manual in any form (electronic,

mechanical, photocopying, recording, or other forms).

ECLARATION

This manual is designed for the usage of the ASD60 Smart Diagnostic Kit and provides

operating instructions and product descriptions for users of the ASD60 Smart Diagnostic

Kit.

No part of this manual can be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means (electronic, mechanical, photocopying, recording, or

Содержание ASD60



























































































Результаты поиска

Содержание ASD60

Отзывы:

Похожие инструкции для ASD60

Бренды по названию

Популярные бренды

Xtool ASD60, Руководство пользователя

Результаты поиска

Содержание ASD60

Отзывы:

Похожие инструкции для ASD60

Бренды по названию

Популярные бренды