Xtool ASD60, Руководство пользователя

Страница: 27 / 90

— 21 —
Read Trouble Code
Read trouble codes (DTCs) that are stored in ECU. For the trouble code, the diagnostic
tool will give specific detailed definitions and explanations to help you locate and
eliminate the car fault.

Stored Code
Stored codes are the current emission-related DTCs from the ECM of the vehicle.
OBDII Codes have a priority according to their emission severity, with higher priority
codes overwriting lower priority codes. The priority of the code determines the
illumination of the MIL and the codes erase procedure. Manufacturers rank codes
differently, so expect to see differences between makes.

Pending Code
These are codes whose setting conditions were met during the last drive cycle, but
need to be met two or more consecutive drive cycles before the DTC actually sets.
The intended use of this service is to assist the service technician after a vehicle
repair and after clearing diagnostic information, by reporting test results after a
driving cycle.
c. If a test failed during the driving cycle, the DTC associated with that test is
reported. If the pending fault codes do not occur again within 40 to 80
warm-up cycles, the fault is automatically cleared from memory.
d. Test results reported by this service do not necessarily indicate a faulty
component or system. If test results indicate another failure after additional
driving, then a DTC is set to indicate a faulty component or system, and the
MIL is illuminated.