manualshive.com logo in svg

XTM Racing X-Factor Nitro Monster Truck, Руководство пользователя, Страница: 6 / 16

Поделиться
Скачать
XTM Racing X-Factor Nitro Monster Truck Скачать руководство пользователя страница 6

6

Visit our website at http://xtm.globalhobby.com or for Customer Service at http://globalservices.globalhobby.com

SECTION 4:  PREPARING TO RUN YOUR X-FACTOR NITRO MONSTER TRUCK

Now that you are familiar with the major component parts of your X-Factor Nitro Monster Truck, and with the functions of the Hitec Lynx
Sport transmitter, it's time to prepare your X-Factor for its first run.

Step 1:  Final Assembly

❑

Push the antenna down into the molded hole

in the top of the transmitter.

❑

Thread the antenna (clockwise) into place

and tighten it 

gently

 until it stops.

❑

Remove the plastic battery cover.

❑

Install 8 AA Alkaline batteries into the battery

tray, making sure that the polarity is correct.

❑

Reinstall the battery cover.

❑

Remove the two screws holding the battery

box in place, then remove the battery box from
the chassis.

❑

Remove the battery holder from the battery box.

❑

Install 4 AA Alkaline batteries into the battery

holder, making sure that the polarity is correct.

Note:

  Make sure that the batteries are pushed

firmly into place.

❑

Carefully plug the two red connectors firmly

together, then push the battery holder into the
battery box along with the wires and connectors.

❑

Reinstall the battery box, making sure that you

don't pinch the wires.

❑

Carefully insert the end of the receiver antenna

wire into one end of the plastic antenna tube.

❑

Slide the antenna through the tube and out

the other end.

❑

Push the end of the plastic tube firmly into the

molded hole in the receiver box cover.

Note:

  Leave the excess antenna hanging from

the top of the tube.  Under no circumstances
should you cut or shorten the antenna.

❑

Slide the transmitter's on/off switch to turn on

the transmitter.  The green LED should glow
brightly.

Note:

  If the green LED does not glow or if the red

LED is glowing, check the batteries and replace
them if necessary.

❑

Slide the receiver's on/off switch to turn the

receiver on.  You should hear the servos move to
their proper positions.

Note:

  Always turn on the transmitter first, followed

by the receiver.  After you're done, turn off the
receiver first, then turn off the transmitter.

1

2

3

4

5

6

7

8

9

Continued on Next Page

Содержание X-Factor Nitro Monster Truck

















Отзывы:

Нет отзывов