XTM Racing Mammoth ST, Руководство пользователя, Страница: 7 / 64

7
Now that you are familiar with the major component parts of your Mammoth ST Nitro Stadium Truck, and with the functions of the Hitec
Aggressor transmitter, it's time to prepare your Mammoth ST Stadium Truck for its first run.
✦ ✦ ✦ ✦ ✦
IMPORTANT
✦ ✦ ✦ ✦ ✦
Before continuing, please double-check that you've read and understood the warnings printed on page # 2. It's
important that you understand this information before preparing to run your Mammoth ST Nitro Stadium Truck. Also, remember, if you
have any questions or encounter any problems, you can contact us using the Customer Service Information on page # 2.
YOUR MAMMOTH ST NITRO STADIUM TRUCK SHOULD INCLUDE THE FOLLOWING ITEMS SEPARATELY IN THE BOX:
●
Mammoth ST Nitro Stadium Truck Chassis
●
Hitec Aggressor AM Transmitter
●
Telescoping Transmitter Antenna
●
Body and Wing w/ Mounting Screws (2)
PREPARING TO RUN YOUR MAMMOTH ST NITRO STADIUM TRUCK
STEP 1: FINAL ASSEMBLY
❑
Push the telescoping transmitter antenna down into the molded hole in the top of the
transmitter.
❑
Thread the antenna (clockwise) into place and tighten it gently until it stops.
✦ ✦ ✦ ✦ ✦
IMPORTANT
✦ ✦ ✦ ✦ ✦
Do not force the antenna into place or tighten it too strongly. Doing so
could cause damage to the antenna and/or transmitter.
❑
Remove the plastic battery cover from the bottom of the transmitter.
❑
Install 8 AA Alkaline batteries into the battery tray, double-checking to make sure that
the polarity is correct.
❑
Reinstall the battery cover and set the transmitter aside for now.
●
Tires and Wheels (Glued)
●
Body Clips (4)
●
Decal Set
●
Yellow Plastic Parts Set
Upgrading your transmitter to use rechargeable NiCD cells is easy. All you
need to do is purchase 8 AA rechargeable NiCD cells (P/N 256911) and a
110V AC overnight charger (P/N 759805). This will allow you to recharge the
batteries without removing the batteries from the transmitter and it will save
you money in the long run, since you won't need to purchase Alkaline
batteries when they run low.
HITEC AGGRESSOR TRANSMITTER UPGRADE TIP
❑
Install the tires and wheels onto the chassis, making sure to tighten the wheel retaining
nuts firmly.
☞
Notice that the back of the wheels are molded to key over the hex-shaped wheel
hubs. All four wheels and tires are the same.
●
Plastic Receiver Antenna Tube
●
Toe-Angle Adjustment Blocks
Continued On Next Page
☛ ☛
☛ ☛
☛