XTline XT105300, Инструкция по эксплуатации

Страница: 19 / 19

Choose sanding paper carefully for each application for best operation and finish. To have the best sanding result, it is
recommended to work with lower speed. Use the sanding feature for sanding off old paint from timber and metal surface. It can also
be used for sanding timber smooth.
WO RKING HINT S FOR YOUR POLISHE R
1. At all times, let the polisher do the work-do not force it or apply excessive pressure to the polisher. Preferably, use a light circular
motion. Pressing too hard will slow down the machine’s movement and affect the quality of the work.
2. The most common error, however, is applying too much wax. If pad absorbs too much wax, it will not last as long, and polishing is
more difficult and takes longer.
3. I f bonnet continually comes off pad, please try with a new bonnet.
4. I f wax seems difficult to buff, you may have used too much wax.
MAINTENANCE
Remove the plug from the socket before carrying out any adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use
water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep
the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you may see sparks through the ventilation
slots. This is normal. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.