XTline XT102755, Инструкция по эксплуатации

Страница: 68 / 73

1
3
2
TIP!
•
The speed dial ( 3 ) cannot be reset from position 1 directly to position 6 , and vice versa.
The force setting of the dial can damage the device. When changing the speed setup,
always turn the dial gradually to the next adjacent gear until the desired speed setup is
reached.
FRONT HANDLE
The front handle ( 2 ) can be further adjusted to the position that best suits the operator. To
change the position, use an Allen key. Insert it to the screw head located on the handle and turn
it counter-clockwise to loosen the screw. Then slide the handle to the optimal position and
retighten the screw again properly.
1. Front handle
2. Allen key
3. Screw
TIP!
•
Take a moment to adjust the handle correctly, especially if you plan to work with the
sander for an extended period of time. This will significantly increase operating comfort
and, additionally, reduce work effort.
WARNING!
• Always make sure that the front handle is firmly fixed. Failure to do so may result in
unexpected release of the handle, which may result in personal injury.
MAIN HANDLE
The handle is rubber-coated and ergonomically shaped for a firm grip of the sander. During
operation, hold the sander firmly with one hand on its main handle ( 6 ) and with the other hand
on the front handle ( 2 ). You will achieve maximum control and safety when working with the
device.
The front handle and the main handle allow the device to be gripped with both hands, which
increases the control of the device. Position the sander horizontally to the workpiece and your
hands at a safe distance from the sanding belt.
SANDING BELT INSTALLATION AND REMOVAL
Caution! Before inserting or removing the sanding belt, first make sure that the battery is
disconnected from the device.