Xterra TRX3500, Руководство пользователя

Страница: 13 / 25

12
HRC (Heart Rate Control)
1. Select HRC via the Program key then press Enter.
2. The console displays ”Adjust age, Age> 35”. Press ENTER after age has been adjusted.
3. The console displays ”Adjust weight. Weight> 150”. Press ENTER after weight has been adjusted.
4. The console displays ”Adjust time. Time> 30:00”. Press ENTER after time has been adjusted.
5. The console displays “Adjust target heart rate”. The console will console will calculate target heart
rate according to the formula (220-age) x 0.6. If the user changes the target heart rate percentage,
new target heart rate percentage will be displayed. When target heart rate is adjusted, press Enter.
6. If the user presses START without wearing HR stripe, MC will display “This program must wear HR
strap”.
7. If the user presses START and the heart rate signal is detected, the manual control begins.
8. Use the existing heart rate control software, except use the Incline adjustments only. When the
software would normally adjust the Speed setting, do not change the speed but instead display in the
message window what the user should set the speed to. For example, if the software would make a
speed change to 2.3 MPH then just show in the MW: “SET SPEED TO 2.3 MPH.
Preset Program Profiles
P1 Speed Incline P9 Speed Incline
P2 Speed Incline
P3 Speed Incline
P4 Speed Incline
P5 Speed Incline
P6 Speed Incline
P7 Speed Incline
P8 Speed Incline
P10 Speed Incline
P11 Speed Incline
P12 Speed Incline
P13 Speed Incline
P14 Speed Incline
P15 Speed Incline
P16 Speed Incline