10
SB4.5r Fitness Bike
#70
. 5/16” x 18mm
Flat Washer (2 pcs)
#73
. 5/16”
Split Washer (2 pcs)
#95
. 5/16” x 3/4”
Button Head Socket
Bolt (2 pcs)
#81
. M5 x 12mm
Phillips Head Screw
(4 pcs)
4
Hardware Step 4
1. Cut the plastic tie that holds the plastic cover on the handlebars.
Remove the plastic cover and set it aside. Install the Front Handlebars
(
3
) and secure with two Button Head Socket Bolts (
95
), Split Washers
(
73
) and Flat Washers (
70
). Snap the plastic cover back on.
2. Connect the two wires (
107
&
109
) to the mating connectors on the
back of the Console (
94
) and secure the Console with four Phillips Head
Screws (
81
). Be careful not to pinch the wires between the console and
mounting plate.
3. Install the two pedals onto the Crank Arms. The left Pedal (
35
) is a
reverse thread so as you turn the pedal bolt into the crank arm turn it
counter-clockwise as if you are loosening it.
4. The right Pedal (
36
) is a normal thread so tighten it clockwise. Make
sure the pedals are as tight as you can possibly get them. It may be
necessary to re-tighten them again after a few months of use.
Console, Handle Bars & Pedals