ERG200 Rower
7
2 Carriage Bolt (#19)
Left Pedal (#14L)
Right Pedals (#14R)
2 Axle for Pedal (15)
2 Allen Bolt (#12)
2 Washers (13)
Attaching Pedals
2
Hardware Step 2
1. Attach the pedal support tube (17) to the bottom of main frame
(1). Secure using two sets of carriage bolt (19), washer (25)
and domed nut (34).
2. Attach the left pedal (14L) to the left bracket of pedal support
tube (17). Secure using one axle for pedal (15),two sets of
allen bolt (12) and washer (13).
3. Repeat the same procedure for right pedal.
4. Pull out the lock pin (55) from pivot on u type connect tube
(58). Flip down the bracket and insert the lock pin (55) back to
the pivot to lock the bracket in horizontal position.
