8
ERG200 Rower
1. Insert the sliding rail (26) to the u type connect tube (58).
Secure using four sets of allen bolt (24) and washer (25) on
the bottom , two sets of allen bolt (24) and washer (25) on the
top.
2. Attach collar (22) to each side of the track on this end of
sliding rail (26). Secure using one allen bolt (23).
3. Slide the Seat (11) onto the sliding rail.
4. Repeat same procedure for other two collars (22) to the other
end of sliding rail (26).
5. Attach the end cap for sliding rail (5L/R) to the back of sliding
rail (26).
6. Attach the rear stabilizer (28) to sliding rail (26). Secure using
four sets of allen bolt (24) and washer (25).
10 Allen Bolt (#4)
10 Washers (#25)
4 Allen Bolt (#23)
Attaching Sliding Rail Frame
3
Hardware Step 3
