background image

CUSTOMER SERVICE 1-888-707-1880                              Maurice Pincoffs Canada

©

2011

 

11

Operation of the monitor

 

 

 

GETTING STARTED: 

CAUTION:  

Before operating the console, read the following precautions: 

  Do not stand on the walking belt when turning on the treadmill 

  Always wear the safety key.    Pulling the safety key will stop tread-belt movement. 

  Adjust the speed in small increments to avoid sudden jumps in speed 

  To reduce the possibility of electric shock, keep the console dry.    Avoid spilling 

liquids on the console and place only sealed water bottles in the water bottle holders. 

  Do not use excessive pressure on console control keys.    They are precision set to 

function properly with little finger pressure.    Pushing harder is not going to make the   
unit go faster or slower.     

  Understand that changes in speed and incline do not occur immediately. Set your 

desired speed on the computer console and release the adjustment key. The 
computer will obey the command gradually. 

 
How to use the safety key 

1. Place the magnet into position on the round metal portion of the console control head. 

Your treadmill will not start and operate without this. Removing the magnet also 
secures the treadmill from unauthorized use. 

2. Fasten the plastic clip onto your clothing securely to assure good holding power. 

Note: 

The magnet has strong enough power to minimize accidental, unexpected stopping. 
The clip should be attached securely to make certain it does not come off.    The 
treadmill will stop, depending on speed, with a one to two step coast anytime the 
magnet is pulled off the console. Use the red Stop / Pause switch in normal operation. 

 

 

Содержание 1640255





























Отзывы: