CUSTOMER SERVICE 1-888-707-1880 Maurice Pincoffs Canada
©
2011
10
TREADMILL OPERATION
Your treadmill features a walking belt coated with a lubricant.
IMPORTANT: Never apply silicone spray or other substances to the walking belt or walking board.
Such substancs will deteriorate the walking belt and cause excessive wear.
How to plug in the power cord.
GROUNDING INSTRUCTIONS.
This product must be grounded. No plug adapter
should be used with this product.
▲
WARNING:
Improper connection of the
equipment grounding conductor can result in a risk of
an electric shock. Check with a qualified electrician if
you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the
product, if it will not fit the outlet; have a proper outlet
installed by a qualified electrician. The use of an
extension cord with this product is not recommended.
If an extension cord is needed, use a short (less than 10
feet) heavy gauge (14 gauge or better) extension cord
with a three prong (grounded) plug and receptacle.
IMPORTANT: If the power cord is damaged, it must
be replaced with a manufacturer recommended power
cord.
1.
Plug the indicated end of the power cord into
the socket of the treadmill. See drawing
below.
2.
Plug the power cord into an appropriate
outlet that is properly installed and gounded.
See drawing below. Important: The
treadmill is not compatible with
GFCI-equipped outlets.
Note: Your power cord and outlet may appear different
