manualshive.com logo in svg

Xterra 1640250, Руководство пользователя

Поделиться
Скачать
Xterra 1640250 Скачать руководство пользователя страница 23

CUSTOMER SERVICE 1-888-707-1880                              Maurice Pincoffs Canada

©

2009

 

22

TREADBELT TRACKING ADJUSTMENT: 

The performance of your treadmill is dependent on the frame running on a reasonably 
level surface. If the frame is not level, the front and back roller cannot run parallel, and 
constant belt adjustment may be necessary. 
The treadmill is designed to keep the treadbelt reasonably centered while in use. It is 
normal for some belts to drift near one side while the belt is running with no one on it. 
After a few minutes of use, the treadbelt should have a tendency to center itself. If, during 
use, the belt continues to move toward one side, adjustments are necessary. 

 
TO SET TREADBELT TRACKING: 

A 6 mm Allen wrench is provided to adjust the rear roller. Make tracking adjustments from 
the 

left 

side only. Set belt speed at 

approximately 2 to 3 mph. A small 
adjustment can make a dramatic 
difference. Turn the bolt only a 1/4 
turn and wait a few minutes for the 
belt to adjust itself. Continue to make 
1/4 turns until the belt stabilizes in the 
center of the running deck. The belt 
may require periodic tracking 
adjustment depending on use and 
walking/running characteristics. Some 
users will affect tracking differently. Expect to make adjustments as required to center the 
treadbelt. Adjustments will become less of a maintenance concern as the belt is used. 
Proper belt tracking is an owner responsibility common with all treadmills. 
 

ATTENTION: 
DAMAGE TO THE RUNNING BELT RESULTING FROM IMPROPER TRACKING / 
TENSION ADJUSTMENTS IS NOT COVERED UNDER THE SPIRIT WARRANTY. 

 
MAINTENANCE MODE:

 

If you want to set the Speed and Distance to Metric or if there is a problem with the speed 
and you would like to perform the calibration procedure, use the Maintenance Mode. To 
enter Maintenance Mode press, and hold for 5 seconds, the Start and Fast keys while 
installing the safety key.   

•

  The large display window will now be showing the Roller size. Roller size is used 

for the calibration process and should be set to 1.85 for TR250 (2.35 for TR350) 

•

  The large display window will also display the setting for M (miles) or K 

(Kilometers). Press the Enter key to change between M and K. 

•

  To run the calibration procedure, press the Start key.   

o

  The display will show a number for the lowest speed setting (for miles the 

number should be 0.5). Adjust the low speed setting with the Fast/Slow 
keys and press Start. 

o

  The display will show a number for the top speed setting (for Miles it should 

be 10.0). Adjust the top speed setting and press Start to begin calibration.   

o

  The belt will start automatically and will adjust speeds between low and high. 

Be careful because the belt will change speeds without warning. When the 
calibration is finished the display will return to the start-up screen. 

Содержание 1640250



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды