background image

CUSTOMER SERVICE 1-888-707-1880                              Maurice Pincoffs Canada

©

2009

 

3

14. Handicapped individuals should have medical approval and close supervision when using this 

treadmill. 

15.  Do not place hands or feet under the treadmill.   Always keep hands and legs off of the treadmill 

when others are using it. 

16. Never turn on treadmill while standing on treadbelt.  Always hold the handrails while using the 

treadmill.    Always return the treadmill to the slowest speed to provide for safe dismount and low 
speed restart. 

17.  To disconnect, turn all controls to the off position, then remove plug from outlet.   
18. 

 

Do not attempt to raise, lower or move the treadmill until it is properly assembled. See assembly on 

page 5 and to fold and move the treadmill on page 15.    Care must be taken when lifting or moving 
the equipment, so as not to injure your back.    Always use proper lifting techniques.     

19. Use the treadmill only for its intended use as described in this manual.  Do not use any 

attachments that are not recommended by the manufacturer. 

20.  User weight should not exceed 275 (125kg). 
21.  Never allow more than one person on the treadmill at once. 
22. Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward.  This 

allows your heart rate to gradually increase and decrease and will help prevent straining muscles. 

23.  Never hold your breath while exercising.    Breathing should remain at a normal rate in conjunction 

with the level of      exercise being performed. 

24.  Start your program slowly and very gradually increase your speed and distance.   
25.  Always wear suitable clothing and footwear while exercising.  Do not wear loose fitting clothing 

that could become entangled with the moving parts of your treadmill.    Do not walk or jog barefoot, 
in stocking feet or loose fitting shoes or slippers. 

 
 

WARNING:

 Before beginning any exercise program consult your physician.  This is especially important for 

individuals over the age of 35 or persons with pre-existing health problems.    Read all instructions before using 
any fitness equipment.    We assume no responsibility from personal injury or property damage sustained by or 
through the use of this product. 

 

SAVE THESE INSTRUCTIONS 

 

 
 
 
 
 
 
 
 

Содержание 1640250



























Отзывы: