XtendLan XL series, Руководство пользователя

Страница: 32 / 46

30
Data mapping port: Data mapping port of user-specified device on the router
(works only under specified mode).
Web mapping port: Web mapping port of user-specified device on the router
(works only under specified mode).
Data mapping port status: When UPNP function runs successfully, the status bar
will echo the data port mapped to the router by the device.
Web mapping port status: When UPNP function runs successfully, the status bar
will echo the web port mapped to the router by the device.
After setting all the parameters, click [save] to make the parameters valid.
[RTSP settings]
RTSP on/off: Check RTSP switch to enable RTSP function.
RTSP port: Default port is 554.
With RTSP function enabled, users can review the audio and video streams in real
time via players that supports standard RTSP protocol (e.g. VLC, Quicktime).
[Public IP mail notification]
Mail notification on/off: Check this switch to enable public IP mail notification
function.
Interval: Select the interval of public IP mail notifications.
After enable this function, when the device starts or detects public IP change, it will
send notification mail to the mail address set in “mail settings”.
4.5 User Management
See below for IP camera user manager settings interface:
You can set three users for every camera, one is Administrator and the others are
general users.
Administrator authority: It can operate and set all functions and parameters of IP
camera
General user authority: (1) It can perform operations like snapping, recording,
playback, talkback, monitoring, alarm clearing, log searching, zooming and full-screen
reviewing; (2) It can do settings like visit setting, image lightness and color adjustment,
PTZ and lens control, etc.
Note:
User name and password must be 1-16-character-strings consisted of letters,