XtendLan XL-ICA562M1CIR, Руководство пользователя

Страница: 80 / 83

79
7.2.1 Power cable connection check
Check if the power cable is connected to the camera properly.
Check whether the output of the adaptor is regulated 12V DC 1A(for built
※
-in IR LED model) or
500mA(for No IR LED model)
7.2.2 Network cable(LAN Cable) connection check
Check whether the network cable is connected correctly.
[Caution] Use direct LAN Cable or cross cable according to network condition. (Refer to
chapter 2 Video check)
① Cable check
[Direct Cable]
Hold each end of both side and check if same color's cable is connected to same location in
RJ45 jack or not.(Connection with IP sharing device or cable modem)
A. B.
[Cross Cable]
Hold each end of both side and check whether 1, 2(Tx+, Tx-) and 3, 6(Rx+, Rx-) are cross or
not.(Connection with PC)
C. D.