XtendLan TC-965, Руководство пользователя

Страница: 50 / 65

41
Soft-Off by PER-BTIN
If you choose
“Instant-Off”, then pushing the ATX soft power switch button once will switch
the system to
“system off” power mode. You can choose “Delay 4 sec.” If you do, then pushing
the button for more than 4 seconds will turn off the system, whereas pushing the button
momentarily (for less than 4 seconds) will switch the system to
“suspend” mode. The choices:
<Instant-off (default)>, <Delav 4 Sec>.
PWRON After PWR-Fail
Use this to set up the system after power failure. The
“Off” setting keeps the system
powered off after power failure, the
“On” setting boots up the system after failure, and the
“Former-Sts” returns the system to the status before power failure. Default setting :<on>.
Wake-Up by PCI Card
Select [Enabled] when the incident occurred in any PCI cards, PCI cards will be
issued by PME signal so that the boot system back to full status
。
The choices :
：
[Enabled]
、
[Disabled(default)]
。
Power On by Ring
When Enabled an input signal on the serial Ring Indicator (RI) line (in other words,
anincoming call on the modem) awakens the system from a soft off state. The choices :<
Enabled (default)>, <Disabled>.
Resume by Alarm
When Enabled, your can set the date and time at which the RTC (real time clock) alarm
awakens the system from Suspend mode. The choices :<Enabled>,<Disabled (default)>.
Primary and Secondary IDE 0/1
When Enabled, the system will resume from suspend mode if Primary IDE 0 /1 or
Secondary IDE 0/1 is active. The choice :< Enabled>,<Disabled>.
FDD, COM, LPT Port
When Enabled, the system will resume from suspend mode if FDD, COM port, or LPT port
is active. The choice :< Enabled>, <Disabled>.