XtendLan TC-965, Руководство пользователя

Страница: 27 / 65

3.3 Installing the 2.5" Hard Disk Drive (HDD)
TC-965 provides users with a 2
.5” HDD bay inside. Please follow the following steps to
install HDD:
１：
Turn 0ff power
，
Remove the power line first
。
2
：
Twist off the screws of host bottom and front panel
，
remove the top cover.
3
：
Twist off the screws of HDD bay
，
take out the 2
.5” HDD bay
。
4
：
Choose the motherboard interface specification 2.5-inch hard drive, will be fixed in the HDD
bay.
5
：
Put the installed HDD bay into chassis, tighten screws.
。
6
：
After completing installation of Hard disk, get the motherboard fixed inside the chassis and
connect all the signals-Lines.
３.4
Installing Wall-Mount
TC-965 in line with standard VESA MOUNT
，
Can be achieved wall-mount function
，
Please follow the following steps to install Assemble Rail:
1
：
Take out the
wall-mount
as per accessories
2
：
Aim it to screw hole and install it to the bottom panel of TC-965 according to the
chart as below
.
3
：
Place TC-965 installed wall-mount where you need.