13
001101
29
011101
45
101101
61
111101
14
001110
30
011110
46
101110
62
111110
15
001111
31
011111
47
101111
63
111111
16
010000
32
100000
48
110000
Protocol KRE-301 for KODICOM card hard disk video recorder, protocol
PELCO-D and RM110 for Shanghai Chenova hard disk video recorder all adopt the
hexadecimal system, which is different from other protocols adopting decimal system,
so the address should be converted into decimal system. For details, please see coding
switches in Table 3.
Tab le 3
：
Correspondence of
Hexadecimal
Address and Coding Switches
No
654321
No
654321
No
654321
No
654321
1
000001
5
000101
9
001001
13
010011
2
000010
6
000110
10
010000
14
010100
3
000011
7
000111
11
010001
15
010101
4
000100
8
001000
12
010010
16
010110
Please setup coding switches according to Table 2 or Table 3 as per the address you
defined by yourself.
2.
Communication Baud Rate Setup
As shown in picture 11, DIP-7 and DIP-8 of the 8-button coding switches are
used to setup Baud rate of communication and 4 different Baud rate can be selected
(1200BPS/2400BPS/4800BPS/ 9600BPS). The state “ON” of each bit means“1”,
while”OFF”means”0”. Table 4 shows states of correspondence of Baud rate and
coding Switches.
Table 4
：
Correspondence of Baud Rate and Coding Switches
Coding
switches
1200 bps
2400 bps
4800 bps
9600 bps
No. 7
OFF
ON
OFF
ON
No. 8
OFF
OFF
ON
ON
Please setup the coding switches according to Table 4 based on the communication
baud rate applied for constant speed ball device.
3.
Protocol Setup
As indicated in the picture 11, DIP-1 to DIP-4 of the 6-button coding switches
are used to setup protocol of the constant speed ball. The built-in Decoding PCB
penal provides protocols as listed in Table 5. Other protocols can also be written-in as
the user requires.
