XtendLan IPM-401W, Руководство пользователя

Страница: 32 / 71

- 32 -
2. Ping Setting :

No. : The number of which power to use Ping function

Ping Action : Stop and Continue ping after the action is activated .

IP & Host Name : Input the IP Address ( ex: 122.116.123.138) or
web address (eee.google.com) of the IP you would like to ping.
Select the action that you would like the Ping Function to use when the
device being Ping cannot be located or is not responding. User can use
the
“
ping test
“ bottom to check the address valid or not

Ping Failure: The number of ping failures before the Action is activated. The setting times
rage is 1 to 99. Select the number of Ping Failures that you would like to occur before the
action is activated. The reddish pink number to the right represents the actual number of ping
failures. Keep in mind that four consecutive pings equals to 1 Ping failure.

Mode : User can select the action was activated by one / two IP Host fail or either one fail
( Mode OR) or both fail ( Mode AND ) .
None : Only ping one Host IP. Action( Power ON/OFF/RESET) will be activated .
OR : IPM-401W will Ping 2 IP address. Either one IP fail times up to the setting times in
“Ping Failure “ . Action (ON/OFF/RESET) will be activated .