Network Video Recorder User Manual
64
11.4.2
Alarm Linkage Setting
Click the linkage setting button, and select the alarm linkage in the pop-up linkage
configuration interface, as shown in Figure 11.15.
Figure 11.15 Alarming Linkage Setting
（1）
Linkage:
select mail linkage, sound alarm, monitor alarm, upload center in four ways;
The following four ways:
a)
Mail linkage: this method needs to set a valid mail box in the Email parameter of the
device, and fill in a valid mail sending and receiving server and port number. With this condition,
if the alarm is triggered, the mailbox will be received in real time. alarm information;
b)
Audible alarm: check to indicate that the buzzer will sound when alarm occurs;
c)
Monitor alarm: the alarm information will be displayed in the alarm information field of
the local device in real time.
d)
Upload Center: The alarm information will be displayed in real time on the Web end or
platform alarm information bar of the device.
（2）
Alarm Output
: When the alarm output is triggered by the device,
（3）
Preview
: Select one, several or all selected channel linkage, in the preview interface to
open the preview linkage, if the alarm triggered, the selected channel screen will automatically
pop up;
（
4
）
Recording
: select one, several or all selected channel linkage, alarm triggered, the
selected channel will be real-time video;
（5）
Snapshot
: select one, a few or all selected channel linkage, alarm trigger, the selected
channel will be real-time capture;
（6）
PTZ Linkage
: PTZ equipment needs to be connected to the equipment. When the alarm
is triggered, the preset point, cruise or trajectory alarm of the PTZ equipment can be linked, or
click Cancel to cancel the PTZ linkage.
Set the linkage mode, click
Confirm
to save.