Network Video Recorder User Manual
63
11.3.3
Scene Change
Figure 11.13 shows the situation where the front-end IPC detects a change in the screen
caused by human or environmental factors, such as the camera being deflected, the camera being
blocked, and the camera's angle or position being changed.
Figure 11.13 Scene Change
（1）
Channel:
select the channel;
（2）
Detect Mode:
only local detection mode is supported, and local device support is
required;
（3）
Enable:
set whether to turn on scene change function.
11.4
Planning and Linkage Operation
11.4.1
Planning
Click the Setup button of the Arming Schedule to schedule the arming schedule. Arming time
can be set using the copy function for a whole week or a certain day of the week a period of time,
set up after the click OK to save, as shown in figure 11.14.
Figure 11.14 Planning
