Network Video Recorder User Manual
29
Figure 7.18 Video Mask
2
）
Select the camera to set privacy mask.
3
）
Click the check-box of
Enable Privacy Mask
to enable this feature.
4
）
Use the mouse to draw a zone on the window, up to 4 privacy mask zones can be
configured and the size of each area can be adjusted.
5
）
The configured privacy mask zones on the window can be cleared by clicking the
button.
6
）
Click the
Save
button to save the settings.
Note
：
Onvif protocol can’t support privacy mask.
7.3
Planning
7.3.1
Recording Setting
Before you start:
Make sure that the HDD has already been installed. If not, please install a HDD.
Steps:
1
）
Enter the
Recording Setting
interface to configure the recording parameters,as shown in
figure7.19.
Figure 7.19 Record Setting Interface
