External alarm input setup:
5.22 Alarms setup
Step 1: Select one alarm input
Use
【
↑
】
【
↓
】
keys to select one alarm input.
Step 2: Alarm type
This is sensor type. You can select “Normal Open” or “Normal Close” according to the
sensor type.
Step 3: Enter into “Alarm in Handling” sub menu
In the “Alarms” menu, there are two options for “Alarm Handling” item. One is “Ignore”,
and the other is “Handle”. If you select “Handle” option, you can active “Policy” and “PTZ
Linkage” buttons on right side. Move “Active Frame” to “Policy” button and press
【
ENTER
】
key,
you will enter into “Alarm in Handling” sub menu: Shown as fig 5.23
63
