XtendLan DVR-410AUTO series, Руководство пользователя

Страница: 71 / 150

XtendLan DVR-410AUTO User
‘s Guide
71
5.3.5.3 Multicast Setup
Multicast setup interface is shown as in Figure 5-12.
Figure 5-12
Here you can set a multiple cast group. Please refer to the following sheet for detailed information.
Allowed IP multicaset adress is 224.0.0.0-239.255.255.255, mas is
―D‖ address space, multicast adress
range is identified by the higher four-
bit of the first byte=‖1110‖
You can use any adress from mentioned range except special reserved IP adresses:
224.0.0.1 All systems in the sub-net
224.0.0.2 All routers in the sub-net
224.0.0.4 DVMRP router
224.0.0.5 OSPF routek
224.0.0.13 PIMv2 router
For example allowed is:
IP: 235.8.8.36
PORT: 3666
After you logged in the Web, the Web can automatically get multiple cast address and add it to the
multiple cast groups. You can enable real-time monitor function to view the view.
Please note multicast function applies to special series only.
5.3.5.4 PPPoE
PPPoE interface is shown as in Figure 5-13.
Input ―PPPoE name‖ and ―PPPoE password‖ you get from your ISP (Internet service provider). Click
save button, you need to restart to activate your configuration.
After rebooting, DVR will connect to internet automatically. The IP in the PPPoE is the DVR
dynamic value. You can access this IP to visit the unit.
Figure 5-13