XtendLan DVR-410AUTO series, Руководство пользователя

Страница: 47 / 150

XtendLan DVR-410AUTO User
‘s Guide
47
4.4 Schedule
After system booted up, it is in default 24-hour regular mode. You can set record type and time in
schedule interface.
4.4.1 Schedule Menu
In the main menu, from setting to schedule, you can go to schedule menu. See Figure 4-13.
z Channel: Please select the channel number first. You can select
―all‖ if you want to set for the
whole channels.
z Week day: There are eight options: ranges from Saturday to Sunday and all.
z Pre-record: System can pre-record the video before the event occurs into the file. The value ranges
from 0 to 30 seconds depending on the bit stream. It may not reach the pre-record time if the bit
stream is too huge.
z
Redundancy: Please note the redundancy function is null if you just installed one HDD. This
function is valid after you installed a HDD and one SD card. You can set the SD card as the
redundancy disk. Please note only the unit of SD card module supports this function.
z Snapshot: You can enable this function to snapshoot image when alarm occurs.
z Record types: There are three types: regular, motion detection (MD) and Alarm.
Please highlight icon to select the corresponding function. After completing all the setups
please click save button, system goes back to the previous menu.
At the bottom of the menu, there are color bars for your reference. Green color stands for regular
recording, yellow color stands for motion detection and red color stands for alarm recording.
Figure 4-13
4.4.1.1 Quick Setup
This function allows you to copy one channel setup to another. After setting in channel 1, you can click
paste button and turn to channel 2 and then click copy button. You can finish setting for one channel
and then click save button or you can finish all setup and then click save button to memorize all the
settings.