XtendLan CAT-5 wired, Техническое руководство

Страница: 108 / 156

Page 104
Chapter 5 CAT5 System Softwares
IP Seg:
Select a IP Segment for the new project. Note that all the IP address must be in the same
segment.We will take 192.168.0.X as an example in this manual
System Type:
IP-device can be used in DT or C5 system, here we choose C5.
Project Name:
Name of the new project; we will name CAT5 System as an example in this
manual
Project Description:
Can input some info about project
Project Mark:
Can input some info about project
Insert time line:
Insert the created time in CAT5 System
frame.
When finish the basic setting, click on Save to save the project information.
5.3.4 IP Node Config
Now when the project property is finished, we can begin to add all the devices to the project.
Right click on CAT5 System, and then select IP Node Config. Select IP nodes which will be adopted
in this project and then select its model and name of the device.
IP Nodes Description
IP Nodes Description
192.168.0.(2 to 240) Door Station/ Common Door Station/ Camera
192.168.0.(241 to 246) Switchboard ( IP-Agent )
192.168.0.(247 to 254) Switchboard (DPG-IP-G21)