background image

REV.12-D 202002  |  Copyright © 2020 by Core Distribution, Inc.  |  COVERED BY ONE OR MORE PATENTS  |  All Rights Reserved  |  Page 7

MAINTENANCE TIPS 

WET LADDER 

If the ladder is wet or if there is water on the ladder, open the ladder to the maximum and, with a dry cloth, absorb the water. It is recommended to let 
the ladder dry fully opened, on one side and then on the other, with the ladder leaning against a wall. 

OXIDISED LADDER

If the ladder is oxidised (due to previous poor drying), there will be white residue on the stiles. First, remove the spots with a dry cloth. Then, to ensure 
the ladder deploys and retracts correctly, use a silicone based spray or a non-petroleum based furniture polish wipe once the ladder is fully opened and 
dry it correctly. Wait a few minutes and close the ladder. Never use a petroleum based product- it will damage the internal mechanism of your ladder. 

PAINT OR OTHER SUBSTANCES STICKING TO STILES

If paint residues were left on the ladder, they must be removed using a sponge. Do not use steel wool since it might damage the opening/closing 
mechanism. After all residues have been removed from the stiles, apply a silicone based spray or a non-petroleum based furniture polish wipe as 

PUKPJH[LKPUHIV]LZLJ[PVU¸6_PKPZLK3HKKLY»»

HARD TO MOVE LATCHES 

If the latches are hard to push, use a compressor or compressed air duster to properly clean the latches. Then perform maintainenceon the latches 
(with a silicone based spray or a non-petroleum based furniture polish wipe) with a forward/backward movement. Dry excess spray with a dry cloth. 

ENGLISH

DRY

CLEAN

CLEAN

CLEAN 

LET DRY 

MAINTAIN

MAINTAIN

EXTEND

TURN

STEEL WOOL 

DRY

MAINTAIN

PETROLEUM

Содержание 820AS+












Отзывы: