XT Racing GPX Pro Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 95

background image

GPX Pro Manual

68

© 2009 XT Racing

Controller menu from main menu

Controller menu access from right-click

Track view

items are used to tell how to draw the track map:

·

Normal

mode just displays the track map in the corresponding comparison item color.

·

GPS quality of service

displays a varying color from red (0%) to green (100%). This display can

show you areas of the track where your GPS signal quality is low. A low signal quality could
mean that you need the GPX Pro external antenna.

·

TPS (or another DAQ channel name)

displays the DAQ channel value from red (0%) to green

(100%). Any analog channel that is calibrated as a 0% to 100% input can be displayed using this
mode. (Only available with the DAQ channel connected and correctly configured)

·

Braking or throttle

displays red when you are decelerating and green when you are

accelerating. This display is useful when you want to see where on the track you got on the gas
after a turn. (Only available with acceleration calibrated and capturing).

The

Set as master for comparison

item sets the master lap for the comparison. The master lap is

used when you want to set your graphmodes in

Graph delta to master

mode. This item will set

the selected comparison item to the master. The master comparison item is indicated with bold,
underlined text in the controller bar item box.

The

Remove from comparison

will remove the the item from comparison.

2.4.1.2

Moving

The controller bar holds the current system location for all of the display of gauges, graphs and
track maps. The track bar at the top of the controller bar shows where you are with respect to the
start and end of the items. You can drag the handle right or left to move the system location.

In addition to dragging the track bar with the mouse to move "time", you can use the keyboard
shortcuts Left and Right keys, if you hold Ctrl, Alt or Shift while pressing the Left or Right key, you
can increase or decrease the change step to move through the lap faster or slower. You can also

«
...
70
71
72
73
74
...
»

Содержание GPX Pro
































































































Отзывы:

Нет отзывов

Похожие инструкции для GPX Pro

Бренд: B-hyve Страницы: 24

EPS-2XPB-SG-AT-V3

Бренд: Larson Electronics Страницы: 3

Бренд: Sibel Страницы: 3

Бренд: Varifan Страницы: 44

Бренд: Radio Systems Страницы: 28

Busch-Timer 6455

Бренд: Busch-Jaeger Страницы: 33

Бренд: Panasonic Страницы: 9

SIMPLEXA 601 top

Бренд: Theben Страницы: 6

Бренд: STRUMENTO MARINO Страницы: 13

Бренд: Redback Страницы: 12

Бренд: Redback Страницы: 20

CountDown Touch

Бренд: Interspace Industries Страницы: 12

Бренд: Interspace Industries Страницы: 12

Бренд: General Components Страницы: 3

Бренд: ENDA Страницы: 2

Бренд: ENDA Страницы: 2

Бренд: ENDA Страницы: 2

Бренд: ENDA Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды