XT Racing GPX Pro, Руководство пользователя

Страница: 7 / 95

GPX Pro 3
© 2009 XT Racing
This screen will be the screen shown during the entire race.
If this is the first time you have raced at this track , the device will
automatically determine that you have completed a circuit and
will start timing once it has determined the geometry of the track.
If you have raced at this track before , as soon as you cross the
start/finish line, the GPX will recognize the track and start timing
laps immediately.
Lap times will be “held” at the end of each screen for 10 seconds (menu adjustable).
When you slow down to under 5 mph (menu adjustable), the GPX will stop acquiring data for that
session and will ask you to name the new track you have just raced:
If you just hit Menu at this point, it will use the name suggested (NEW TRACK 1) as the track
name. If you would like to name the track otherwise, press the Left and Right arrow buttons to
cycle through letters/numbers/space. Press Select to go to the next character position, and use
the arrow buttons again. When you are done entering the track name, press Menu and you will
go back to the main screen.
NOTE: you can “back up” to the previous character position by pressing Select when a “left
arrow” shows as you’re cycling through the letters and numbers
Race again, and the whole process will start over.
Reviewing laps in Circuit Racing Mode
From the main screen, press the Left arrow to go to the first session stored in the GPX, or the
Right arrow to go to the most recently captured session. This will show a summary screen for that
session: