xsto CT420S, Руководство по эксплуатации

Страница: 7 / 58

3

Store the CT420S in an environment above 0
℃
for at least one hour
before operation.

Read the technical parameters carefully. Do not exceed the rated
weight.

Only trained person can operate CT420S. The operator should be
in health both physically and mentally.

When stair climber the machine is going up and down, other
personnel shall not stand under the machine .

Anti - skid shoes are required. It must be operated with two hands.
Run the pilot operation without load and at low speed.

Make sure there are no obstacles on the stairs and the steps are
not slippery
。

Only for transport of cargo, not for people . Safety s trap must be
used to secure the cargo.

Do not reach under the load plate or touch the rotating part and
track.

Do not use the CT420S in rainy, wet, snowy or icy condition , as side -
slip or other potential dangers may be caused.

Do not use CT420S if the crawler track is broken.

Do not use CT420S on road that is slippery or with barrier.

Do not use the CT420S on the escalators or moving belts.

Turn off the CT420S immediately if the drive part is stuck.

Make sure the power is off during transportation and the relative
laws and regulations are followed.